kategorię z listy


The E2M0.7 is a small two stage oil sealed rotary vane pump that features a very low sound level of only 43 dB(A), compact dimensions, low energy consumption and low operating temperature. It will appeal to scientific instrument manufacturers and laboratory users for backing small turbomolecular or diffusion pumps as well as general laboratory applications.

Fitted in a cabinet, the pump will be virtually inaudible and the low operating temperature will minimize the heat load on the equipment. Vertical vacuum inlet with horizontal option.


This is a two stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.


Features and Benefits

  • Very low sound level of only 43 dB(A).
  • The pump is designed for reliable, long-term operation.
  • Compact dimensions.
  • Low energy consumption.
  • Low operating temperature will minimize the heat load on the equipment.
  • The pump is a free-standing unit.
  • The motors are totally enclosed and are cooled by the motor-cooling fan.
  • Pressure die cast oil box with integral oil seals prevents oil leaks.
  • Gas ballast valve for large water vapor handling capacity.
  • Externally approved to EN61010, CSA, C22.2 and UL61010.


  • Analytical instruments
  • Leak detectors, Helium
  • Research and development
  • Backing Turbomolecular pumps
Dane techniczne
Displacement (swept volume) 50 Hz 0.9 m3h-1 / 0.5 ft3min-1
Displacement (swept volume) 60 Hz 1.1 m3h-1 / 0.6 ft3min-1
Speed (Pneurop 6602) 50 Hz 0.75 m3h-1 / 0.4 ft3min-1
Speed (Pneurop 6602) 60Hz 0.95 m3h-1 / 0.5 ft3min-1
Ultimate vacuum (total pressure)
  without gas ballast 3.0 x 10-3 mbar / 2.3 x 10-3 Torr
  with full gas ballast 2.0 x 10-1 mbar / 1.5 x 10-1 Torr
Inlet connection NW10 flange
Outlet connection Nozzle 11 mm external Ø
removable from 3/8 inch BSP tapped hole
Maximum permitted pressure at outlet 0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour 15 mbar / 11 Torr
Maximum water vapour pumping rate 8 gh-1
Motor power 0.09 kW
Nominal rotational speed 50/60Hz 1400/1700 rpm
Power connector IEC EN60320 C13
Operating temperature range 12 - 40 °C
Weight, without oil 10 kg / 22 lbs
Noise 43 dB(A) @ 50 Hz
Oil capacity - maximum 0.28 litre
Oil capacity - minimum 0.2 litre
Recommended oil (supplied) Ultragrade 15
Pliki do pobrania
E2M0.7, E2M1 and E2M1.5 Rotary Vacuum Pumps Instruction Manual