The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation.
The Edwards Diffstak 100 (ISO100 inlet) design has been proven over many years with thousands of pumps installed.
This pump has a manually operated high vacuum isolation valve and is supplied with: NW25 elbow, NW25 centering-ring, NW25 clamp, water pipe couplings and ferrules, inlet ISO 100 Co-Seal.
|nitrogen||280 l s-1|
|hydrogen||500 l s-1|
|Min backing pump displacement*||5 m3h-1|
|Recommended backing pump||RV5 or RV8|
|Recommended fluid||Santovac® 5|
|Fluid charge (dry)||125 ml|
|Inlet connection compatible with||ISO100|
|Cooling water connection||6 mm compression fittings|
|Heater power||0.65 kW|
|Min cooling-water flow at 20°C||60 l h-1|
|Pneumatic connections†||6mm coupling x ¼ BSP male stud|
|Pneumatic actuating pressure|
|Minimum||2.4bar / 35psi|
|Maximum||6.9bar / 100psi|
* For maximum throughput
† 100/300P only